Suomy Mr Jump Special White/Red/Blue

  • Sale
  • $299.95
  • Regular price $499.95

While supplies last, we have these Suomy Mr Jump helmets available.

Blow out Pricing, Last in stock


  • MR. JUMP, the fiber helmet studied in details for comfort, technology and for sure safety for end user. It has been studied and tested to optimize the outside and inside air flows.
  • Shell in TRICARBOCO material, produced in two sizes (M and L), mix of Kevlar, carbon and fiber, joint through resin. 
  • Internal polystyrene in 3 sizes (S , M and L) to get the best fitting with variable density as per the size.
  • Homologations ECE 22-05
  • The D-RING RETENTION SYSTEM has been designed and patented by Suomy. 
  • Insert the free side of the strap in the rings. Pull the end until the strap presses firmly against the jaw. 
  • After this operation, it should not be possible to remove the helmet. Verify that by grabbing it from the back and rotating it to the front it cannot be removed and it is fixed to the head. If the helmet tends to come off or rotates freely, tighten the strap again until the right pressure is obtained and repeat test.
  • If after repeating the test you are not able to efficiently tighten the retention system, do not use the helmet. Only after checking the correct tension of the strap, fix the free end locking it with the automatic stud to the release tab.
  • The automatic stud is necessary only to fix the free end of the strap to prevent it from flapping while riding. Fixing the release button does not assure that the helmet is correctly in position and properly fastened: the correct locking of the strap must be verified exclusively following the above paragraphs.
  • To release the retention system, release the automatic stud button and pull the release tab to loosen the closure. Slide out the free end of the strap from the «D Rings». Use the release tab only to remove the helmet! Never release this tab while riding.
  • CHEEK PADS completely removable and washable, with different thickness to get a perfect customization of the helmet.
  • INTERNAL SHELL completely removable and washable, in different thicknesses for a complete customization of the product. 
  • The internal removable shell has been studied for an uniform stand on the head. The visible channels allow the air flow to check the temperature in the internal part of the helmet and to let off the hot air through the back part. 
  • INNER (cheek pads and inner liner) are completely in fabric COOLMAX® ACTIVE with treatment INTERPOWER:
  • Wicks sweat away from the body.
  • Keeps the user fresh, dry and comfortable.
  • Lightweight, soft and breathable fabric.
  • Performance verified and certified by ADVANSA.
  • The SHELL is in polystyrene with channels for air flows.
  • In the front part there are upper and back air ventilation, which help the internal helmet ventilation.
  • On the CHIN GUARD there is an air ventilation for the front ventilation.
  • The OUTER SHELL has ribs to channel better the air flows.
  • The PEAK has an aerodynamic impact. 
  • The wide open space in the front allows the use of any kind of glasses.