Midwest Mountain Engineering Easy Clutch/Brake Lever

  • Sale
  • Regular price $124.95


Clutch Lever Advantages

The primary advantage of this lever is a 50% reduction in actuation force. This means less fatigue, less arm pump, and more endurance, especially during high-intensity race conditions. A shorter than stock lever length allows a one or two finger operation enabling you to squeeze the lever to the bar without releasing your grip with the rest of your fingers. Depending on the mounting position you employ, you can even go for a three finger grab when necessary. The ball on the lever end meets AMA safety rule requirements and provides a comfortable grip reference for your fingers; it also helps prevent accidental release while traversing rough terrain at high speed. The width of the lever distributes the contact pressure over a greater surface area on your fingers reducing load concentrations that induce blistering.

Brake Lever Advantages

Complete your handle bar controls with a matching Brembo brake lever. This lever utilizes the stock pivot geometry so the action is the same as a stock brake lever. The difference is that the brake lever is the same "shorty" length as the CLever clutch levers and has the same ergonomic feel of the wide blade. These features allow you to use a one or two fingered grip on the lever with either a short or long reach. You can maintain a tight grip on your bars using your remaining fingers with no danger of trapping them in between the blade and the bar in a panic grab situation.

Brembo (B2C) fits:

  • KTM ’16-20 125/150 SX/XC/XCW 
  • KTM ’06-20 250/300 XC/SX/XCW/EXC/6D 
  • KTM ’11-20 350 XCF/XCWF/EXCF/SXF/6D  
  • KTM ’09-10 400 XCWF/EXCF  
  • KTM ’07-20 450 XCF/SXF/XCWF/EXCF   
  • KTM ’12-20 500 XCFW/EXCF/6D  
  • KTM ’08-11 530 XCFW/EXCF   
  • Husqvarna ’14-16 125-501 TE/TC/FE/FC (except ’16 FC & ’16 TC 125) 
  • Husaberg ’11-14 125-570 FE/FX/TE
  • Beta ’10-20 All Models 
  • Sherco All years and all models with Brembo clutch and brake master cylinders

Magura 2 (M2C) fits:

  • KTM ’09-15 125/150 SX/XC/EXC 
  • KTM ’09-20 200 XCW/EXC  
  • KTM ’13-20 690 E/R   
  • Husqvarna ’16 FC 250/350/450    
  • Husqvarna ’17-20 125-501 TE/TC/TX/FE/FC/FX
  • Husqvarna ’16-20 701 Enduro/SM

Magura 1 (M1C) fits:

  • KTM ’04-12 65/85/105 SX/XC 
  • KTM ’04-08 125/144 SX/XC/EXC  
  • KTM ’04-08 200 XCW/EXC 
  • KTM ’00-05 250/300 SX/XC/XCW/EXC 
  • KTM ’04-08 400 XCFW/EXCF 
  • KTM ’04-06 525 SX/XC/EXC/XCW
  • KTM ’07-12 690 E/R 
  • KTM ’04-09 950   
  • KTM ’07-13 990 

Brembo (B2B) Fits:

  • KTM ’14-20 125-500 All Models   
  • Husqvarna ’14-17 125-501 TE/TC/TX/FE/FX – Brembo Brakes